Do you wish to add a photo in your quilt that looked more like portion of the fabric than an iron-on decal?
Before, we relied on photo transfer paper to iron our photo onto our quilt block. Have you ever heard about direct-to-garment printing? It’s an incredible new way of getting your preferred photo away from your scrapbook and on to your quilt block.
Direct-to-garment (DTG) printing is a kind of digital printing. Using a price of about $20,000, it’s not practical to run out and buy your very own DTG printer. The common price for latte printer is $8 to $10.
This method is a little more expensive compared to the traditional photo transfer method. That’s partially for the reason that technology is very new. Should you do plan to use a DTG photo on the memory quilt block, there are many things to look for when deciding on the printer that will carry out the be right for you:
1. Make sure there are actually no chemicals required to pre-treat your fabric first. Some DTG printers create an image which is much more like screen printing. You don’t want that appear or feel on your quilt. The ink is going to be hard on the top of the material and definately will eventually (sometimes much earlier than later) will start to crack and wear with washings. Ask your prospective printer to view a sample of something they’ve printed. When you can feel the ink is raised higher than the surface in any respect by any means, it’s probably a sublimation type process which requires chemicals to pre-treat the fabric.
2. Use a kind of digital DTG printing made available from the Brother GT 541. There are actually no chemicals needed to pre-treat the material. The inks bond using the natural fibers and are heat cured to create the graphic. The inks are water based, that helps leave a soft yet crisp image on the fabric.
There are a few downfalls to using led uv printer on your quilt blocks. One pitfall is color limitations. Since DTG printing is actually a form a digital printing, there is no white ink. White is the absence of color. This means that you are unable to print an image on deep blue or black fabric.
Digital garment or fabric printing is a CMYK format – cyan, magenta, yellow, and black. You are able to mix those colors to have a full spectrum of accurate colors – not white. You can find DTG printers that print white ink, but most of these require chemical pre-management of the fabric and definately will give you that thick surface print.
You should make use of a light colored or neutral fabric and it needs to be cotton or even a cotton blend. The material must be capable of withstand 350 degrees for about thirty seconds. Should you be not 09dexypky with one hundred percent cotton or perhaps a 50/50 blend, ask your printer in the event the fabric will work.
Dimensions of your print can be a limitation. Most DTG printers use a printing field approximately 14 inches x 16 inches. For most quilters, that size range won’t become a problem.
And speaking of printing fields, here’s a hint. Most direct to t-shirt printer charge for any 14×16 surface. When your blocks allows 2 or 3 photos to put within that range, you could get all of them printed for the price of one. Seek advice from the printer to determine if it’s possible with the particular project.
Similar to most technological advances, the cost of digital garment (or fabric) printing will most likely decrease as time passes. Maybe it will even be on smaller printers for home and personal use. For the time being, try to get a DTG printer for your next photo quilt project. The final results will look like custom fabric, that will be an excellent touch to your one of a kind quilt!